Timer support for F256 added

src/Makefile

@@ -78,7 +78,7 @@ else
 	LDFLAGS=$(LDFLAGS_FOR_UNIT) --list-file toolbox.map
 endif
 
-SRCS = toolbox.c log.c boot.c memory.c proc.c ring_buffer.c simpleio.c sys_general.c utilities.c $(SRCS_FOR_UNIT) # $(C_SRCS_DEBUGGER)
+SRCS = toolbox.c log.c boot.c memory.c proc.c ring_buffer.c simpleio.c sys_general.c timers.c utilities.c $(SRCS_FOR_UNIT) # $(C_SRCS_DEBUGGER)
 OBJS = $(patsubst %.s,%.o,$(patsubst %.c,%.o,$(SRCS)))
 OBJS4RM = $(subst /,\\,$(OBJS))
 LIBS = dev/devices.a snd/sound.a fatfs/fatfs.a

src/dev/rtc.c

@@ -262,6 +262,6 @@ SYSTEMCALL void rtc_get_time(p_time time) {
  * the number of jiffies since the last reset
  */
 long rtc_get_jiffies() {
-    return 0; // timers_jiffies();
+    return timers_jiffies();
 }
 

src/include/F256/timers_f256.h

@@ -1,11 +1,11 @@
 /**
- * @file timers_c256.h
+ * @file timers_f256.h
  *
- * Define timer registers on the C256
+ * Define timer registers on the F256
  */
 
-#ifndef __C256_TIMERS_H
-#define __C256_TIMERS_H
+#ifndef __F256_TIMERS_H
+#define __F256_TIMERS_H
 
 //
 // TIMER_CTRL_* flags
@@ -24,7 +24,7 @@
 #define TIMER_CMP_RELOAD	0x02	// Set to reload the charge value on reaching 0
 
 //
-// Timer 0 -- Based on system clock (14318180Hz)
+// Timer 0 -- Based on system clock (6MHz)
 //
 
 #define TIMER_CTRL_0    ((volatile __attribute__((far)) uint8_t *)0xf01650)

src/timers.c

@@ -2,26 +2,13 @@
 #include "timers.h"
 #include "gabe_reg.h"
 #include "timers_reg.h"
-
-long jiffy_count;
-
-/*
- * Interrupt handler for the Channel A SOF interrupt... just counts jiffies
- *
- * NOTE: in time, this should be handled by the RTC or another timer.
- */
-void sof_a_handler() {
-    jiffy_count++;
-}
+#include "sys_general.h"
 
 /*
  * Initialize the timers and their interrupts
  */
 void timers_init() {
-    jiffy_count = 0;
-
-    // int_register(INT_SOF_A, sof_a_handler);
-    // int_enable(INT_SOF_A);
+#if MODEL == MODEL_FOENIX_A2560U || MODEL == MODEL_FOENIX_A2560U_PLUS
 
     *TIMER_TCR0 = 0;    // Reset timers 0, 1, and 2
     *TIMER_TCR1 = 0;    // Reset timers 3, and 4 (if 4 is available)
@@ -34,12 +21,42 @@ void timers_init() {
     // Set timer 3 to count up and auto clear
 
     *TIMER_TCR1 = TCR_ENABLE_3 | TCR_CNTUP_3;
+
+#elif MODEL == MODEL_FOENIX_F256 || MODEL == MODEL_FOENIX_F256K || MODEL == MODEL_FOENIX_F256K2
+
+	// Timers off
+	*TIMER_CTRL_0 = 0;
+	*TIMER_CTRL_1 = 0;
+
+	// Enable counting up on timer #1 and preclear
+
+	*TIMER_CHG_L_1 = 0;
+	*TIMER_CHG_M_1 = 0;
+	*TIMER_CHG_H_1 = 0;
+
+	*TIMER_CMP_L_1 = 0xff;
+	*TIMER_CMP_M_1 = 0xff;
+	*TIMER_CMP_H_1 = 0xff;
+
+	*TIMER_CTRL_1 = TIMER_CTRL_EN | TIMER_CTRL_CNT_UP | TIMER_CTRL_SCLR;
+
+	// Set timer 3 to count up and auto clear
+	*TIMER_CMPC_1 = TIMER_CMP_RECLR;
+    *TIMER_CTRL_1 = TIMER_CTRL_EN | TIMER_CTRL_CNT_UP;
+
+#endif
 }
 
 /*
  * Return the number of jiffies (1/60 of a second) since last reset time
  */
 SYSTEMCALL long timers_jiffies() {
-    // return jiffy_count;
+#if MODEL == MODEL_FOENIX_A2560U || MODEL == MODEL_FOENIX_A2560U_PLUS
     return *TIMER_VALUE_3;
+
+#elif MODEL == MODEL_FOENIX_F256 || MODEL == MODEL_FOENIX_F256K || MODEL == MODEL_FOENIX_F256K2
+	uint32_t result = (uint32_t)(*TIMER_CHG_L_1) | ((uint32_t)(*TIMER_CHG_M_1) << 8) | ((uint32_t)(*TIMER_CHG_H_1) << 16);
+    return result;
+
+#endif
 }

src/toolbox.c

@@ -176,15 +176,15 @@ void initialize() {
         INFO("Console installed.");
     }
 
-//     /* Initialize the timers the MCP uses */
-//     timers_init();
-// 	INFO("Timers initialized");
+    /* Initialize the timers the MCP uses */
+    timers_init();
+	INFO("Timers initialized");
 
     /* Initialize the real time clock */
     rtc_init();
 	INFO("Real time clock initialized");
 
-//     target_jiffies = sys_time_jiffies() + 300;     /* 5 seconds minimum */
+//     target_jiffies = timers_jiffies() + 300;     /* 5 seconds minimum */
 //     DEBUG1("target_jiffies assigned: %d", target_jiffies);
 
     /* Enable all interrupts */
@@ -264,7 +264,6 @@ void initialize() {
 t_file_info dir;
 uint8_t buffer[512];
 
-
 void dump(uint8_t * buffer, int count) {
 	char char_buffer[17];
 
@@ -465,6 +464,9 @@ int main(int argc, char * argv[]) {
 	kbd_init();
 
 	test_sysinfo();
+	test_kbd();
+	long jiffies = timers_jiffies();
+	printf("Jiffies: %ld\n", jiffies);
 
 	// Attempt to start up the user code
     // log(LOG_INFO, "Looking for user startup code:");